Plane Crazy's Old Tool List (Updated 11/15/98) Greetings All, Happy to send .jpg or other format photos of any item on this list upon request. If multiple photos are requested, they will be compressed into a .sit (StuffIt) file by AOLs mailer, and you will need to find the appropriate decompression file to view them. I'd recommend saving and reading this off line, as it's quite long. Unless otherwise noted, all of the following are in good or better usable condition. Some planes have had their irons or other parts replaced, and that is noted when known. Some may require fine tuning before being used. Others may need considerable work, and that too will be noted. I try to update this list once a month (on rare occasions more or less often). Updates are e-mailed free by subscription. New items are listed at the top and are proceeded by an asterisk (*). Items marked by two asterisks (**) on the main list are tentatively sold. All items will be sold on a first-come, first- served basis, therefore all items are subject to prior sale. Shipping & return policies at end of list. Wishing all Neanderthals and GALOOTS a happy and safe holiday season. Have a Happy Thanksgiving, Mike NEWLY ADDED ITEMS *1287: Stanley #104 Type 1 Liberty Bell smooth plane (at least 85% japanning, nice early style tote has a few chips from spur, good beaded knob, good cutter has maybe 1/4" usable length remaining, "PAT OCT.5.1875" stamped into left side, no rust or pitting, one of the nicest early one's I've seen) $275 *1288: Millers Falls #11BG junior jack plane (95%+ japanning, good unmarked cutter, 95%+ nickel plating on cap, very good red stained tote and knob, very good overall condition) $70 *1289: Stanley #606c BEDROCK fore plane Type 5 or 6 (80%+ japanning, good "T" logo cutter, few chips from top of good tote, good tall knob, "BEDROCK" lever cap, two patent dates in bed behind frog, few typical dings & scratches but will easily clean to very good cond.) $125 *1290: Stanley #608c BEDROCK jointer plane Type 5 (70%+ japanning, tote dinged and scuffed but intact, tall knob has a few tight cracks at base, over 1-1/2" usable length remaining in good "Q" logo cutter, entire plane needs a good cleaning and will easily clean to very good cond.) $165 *M1291: Stanley #80M malleable cabinet scraper (95% japanning, 95%+ nickel on screws and strap, SW logo strap, like new BB logo blade, fine overall condition) $35 *M1292: Craftsman duplex plane (Same as Millers Falls #85, at least 90% japanning, very good blade, thumb operated blade adjuster, intact fence & rod, missing depth stop, very good overall condition) $25 *M1293: Stanley #80 steel cased rabbet plane (good wood with patent date and Stanley logo stamped into top, 85%+ japanning on cutter holder, good cutter, steel casing lightly pitted & both sides of mouth have been filed open for easier passage of shavings, at least good overall cond.) $85 *M1294: Stanley #40 scrub plane (90%+ japanning, varnish cracking on very good tote & knob, very good SW logo cutter, fine overall condition) $65 *B1295: Stanley #65 low angle block plane (later U.S. model with number in left side, 95%+ blue japanning intact, 95%+ nickel plating, very good BB logo cutter, fine overall condition) $70 *B1296: Stanley #140 rabbet & block plane early Type 2 model (90%+ japanning; 70% nickel plating; good circular R&L logo blade; very good rosewood knob; removable side plate nicely marked "PAT.NOV.6.94." complete, rust free and no pitting, very good overall condition) $110 *1297: Stanley Gage G3 smooth plane (95% japanning, good iron marked "GAGE SELF SETTING PLANE," "PAT'D 2-17-20 No3" in bed behind frog, few spots of paint on very good tall knob, few minor chips from otherwise very good tote, with light cleaning will be at least very good condition) $175 *P1298: Stanley #46 combination plane Type 6 (Japanning 90%+ has had some touching up, intact handle has chip from bottom & two smaller chips from top of top spur, 8 of the original 11 cutters including the slitter in nice owner made cutter box, both depth stops and both spurs intact, clean and in very good overall condition) $165 MISC. COLLECTIBLE TOOLS *MC330: Stanley #60 double cutter spokeshave (90%+ japanning, very good cutters marked "MADE IN USA," fine overall condition) $35 *MC331: Windsor beader Type 3 (nickel 65% needs cleaning, two nice rosewood handles, includes two double ended cutters that appear to be original, DOES NOT have the fence that is shown in PTAMPIA, still a fairly scarce piece in very good overall condition) $185 *MC332: Disston #68 brass back dovetail saw IOB (New saw in original cardboard box with better than 90% label intact, box has been taped in several places with clear tape still at least good, saw very nice) $90 MAIN LIST BENCH PLANES (Smooth, Jack, Fore & Jointer) 1044: Keen Kutter K7c jointer plane (very good rosewood tote, low knob, good original cutter, adjustable frog, very good overall cond.) $120 1045: Sargent VBM 714c jack plane (85%+ japanning; 80% nickel; good tote and tall knob; good iron; some light surface rust on cutter and adjuster screw; with cleaning will be very good overall) $125 1069: Stanley/Gage G6 iron fore plane Type 3 (95% japanning; 50% nickel; very good rosewood knob [tall]; tote chipped near front screw, missing spur and has been glued; over 2" usable length remain in iron marked "GAGE SELF SETTING PLANE" needs light cleaning, very good cond.) $120 1092: Metallic Plane Co. 15" jack plane (similar to 265c on p.175, PTAMPIA Vol.II, adjustable throat, good "CLOVER LEAF" iron, nice knob, tote spur MIA, good lever cap, nice dark patina on sides and wood, PALMER'S AND STORKE'S PATENTS MAY 14.67 AND OCT. 19.68 METALLIC PLANE CO. AUBURN.N.Y." logo on side, tiny chip at rear of throat, very good overall condition) $325 1119: Stanley Handyman H1203 9" smoother (95%+ of original blue paint remains on tote, knob and bed; 95%+ red paint remains on frog and cap iron, needs very light cleaning to be in fine overall condition) $30 1124: Stanley Four Square Household Jack Plane (See bottom of p.212 Walters, same size as a 5 1/4, 90%+ japanning remains on bed, lever cap and frog, good SW logo cutter, roughly 50% of original 4-Square trade sticker remains on repaired tote, tote & knob have lacquered finish, very good overall cond.) $65 1181: Marshall Wells "NORTHERN KING R4" 9-inch iron smooth plane (made for Marshall Wells hardware of Duluth, Minnesota, approx. 75% japanning, good hardwood tote and knob, would make a good user) $45 1182: Siegley #7c 22-inch jointer plane (Approx. 75% japanning, 85% nickel on cap, good knob, chip from left side of tote spur, over 2 1/2" usable length remains of "SIEGLEY" marked cutter, very good overall cond.) $70 1184: Hudson Tool Company/Ohio Tool Company 8 1/2" corrugated smooth plane (Same size as #3 Stanley, similar in style to the jack plane on p.259 P-TAMPIA Vol.II, at least 75% japanning, good Stanley "V" logo cutter, brown finish on tote and knob 90% plus, some white paint spots, little rust around base of knob, will easily clean to very good overall condition) $75 1189: Stanley #3 smooth plane Type 16 (85% or more japanning, nickel 70% and pealing, nice tall knob, nice homemade replacement tote, good BB logo cutter, with light cleaning will be in very good overall cond.) $35 1192: Stanley #5 1/2 extra-wide jack plane Type 15 (maybe 60% japanning, good rosewood tall knob, tote intact but varnish missing, good SW logo cutter, frog adjuster screw, will clean to very good usable cond.) $65 1213: Rockford R5 14" jack plane (Rockford, Ill. maker, 85% japanning, good tote looks like a possible replacement, good knob, LAKESIDE iron has some light rust, will easily clean to very good overall cond.) $65 1220: Stanley #2c seven inch smooth plane (later model with SW logo cutter, some orange paint on side of frog and Stanley logo with orange background on lever cap, nice rosewood tote and tall knob, more than 90% japanning intact, about 60% nickel plating on lever cap remains, very good overall) $550 1238: Stanley #3 Type 11 (at least 75% japanning; few nicks in otherwise nice rosewood tote; two cracks at base of good tall knob; light surface rust and paint splatters on sides cap iron, lever cap & iron; little used V logo cutter; will easily clean to very good overall condition) $60 1242: Ohio Tool Co. 04 smooth plane (At least 70% of rust colored japanning remains, good tapered iron marked "OHIO TOOL CO THISTLE BRAND AUBURN N.Y. U.S.A." Very nice tote and knob appear to be original, with light cleaning will be in at least very good overall condition) $70 1252: BEDROCK #605-1/4 11 1/2" junior jack plane Type 10 (85%+ japanning, 60% or more of original orange paint remains on sides of frog, very good tote and tall knob, clean plane with normal dings and scratches) $550 1259: BEDROCK 606c fore plane Type 6a (Japanning 90%+ likely enhanced, very good type "Y" SW iron, good rosewood tall knob, tote a stained hardwood replacement, patches of light rust on left side and light surface rust over most of sole, very good overall cond.) $140 1260: Stanley #607c jointer plane Type 6 (Japanning 95% and without a doubt enhanced, very good "V" logo iron coated with tacky grease, good tall knob and glued tote look like rosewood but both have been refinished and may be hardwood, sides and sole also have tacky feel and will need light cleaning, very good overall condition) $155 1266: BEDROCK 604 1/2c wide smooth plane Type 3 (early round sided model, has very minor pitting on sides from an earlier cleaning, a good Type "T" logo cutter, tote and low knob have been revarnished, japanning 95%+ but likely enhanced, very good overall condition) $300 1284: Stanley #607 Bedrock Type 7 (at least 85% japanning, good rosewood tote & tall knob, "BEDROCK" lever cap, one patent date in bed, some light pitting on sides and bottom from an earlier cleaning, could be polished out, very good overall condition) $145 BLOCK PLANES (METALLIC) B1061: Stanley #203 5 1/2" adjustable block plane (80%+ japanning, good BB logo cutter, incorrect wood knob, very good overall condition) $75 B1067: Sargent #206 5 1/2" adjustable block plane Type I (same size as Stanley 103, less than 50% japanning, gull-wing cap screw, round Sargent logo on cutter, will clean to very good overall condition) $55 B1079: Sargent 5206 block plane (good blade marked with Sargent logo only, no model number, finish 80%, very good overall cond.) $35 B1080: Sargent 5206 block plane (good cutter marked with model number, clean and in very good overall condition) $45 B1081: Stanley 103 block plane Type I? (early R&L logo & bit of patent date visible on iron, japanning enhanced, very good usable cond.) $25 B1082: Stanley 103 block plane (later model, 90% japanning, good BB logo iron, some light surface rust, will easily clean to very good or better condition) $35 B1114: Sargent #4206 adjustable all steel, low angle block plane (good cutter marked with "SARGENT" logo only, no model number, clean and in very good overall condition) $40 B1115: Sargent #5206 adjustable all steel, low angle block plane (good cutter marked with "SARGENT" logo & model number, cadmium? plating, normal dings and scratches, very good overall condition) $30 B1135: Unmarked double ended block plane (Almost identical to a #130 Stanley, little japanning remains, good unmarked cutter, very good overall usable condition) $25 B1147: Stanley #19 block plane Type 3 or 4 (Patent date and "S" casting mark in bed of plane, 3 patent dates on original lateral lever [original lateral lever was broken & I replaced it with a later 4-date model], one patent date on throat cam, patches of pitting on Type J cutter, 70%+ japanning [likely enhanced at some time], rust where palm would rest on cap, will clean to very good overall condition) $45 B1148: Stanley 220 block plane (90%+ japanning, BB logo cutter, 95% plating, good rosewood? knob, little light surface rust on sides and sole, will easily clean to very good overall condition) $25 B1150: Stanley 220 block plane (95%+ japanning, BB logo cutter, 85% plating, stain pealing from hardwood knob, will easily clean to very good overall condition) $20 B1174: Stanley #65 low angle block plane (later U.S. model, 90%+ blue japanning intact, good BB logo cutter, 95%+ nickel plating on lever cap [note: this is not a knuckle-joint cap], complete and fine overall) $75 B1175: Stanley #60 1/2 low angle block plane (later model with number in the left side, 80%+ black japanning, BB logo cutter in need of serious resharpening, when found the nut on the end of adjuster screw was loose, didn't go back on exactly straight but works perfectly, very good overall condition) $55 B1180: Millers Falls #56 low angle block plane (similar to 60 1/2 Stanley, approximately. 95% japanning, cap is grey/silver, good red box with better than 90% label and minimal wear to top, plane will easily clean to fine overall cond.) $60 B1187: Winchester W15 7" block plane (similar to Stanley #15 type 4, lateral adjuster marked "W 15" good original iron, 70% japanning, minor pitting on sides and sole, at least good overall condition) $110 B1211: Stanley #60 low angle block plane (early model, "10-12-97 patent date on cap & "8-3-97" cast into bed in rear, "FEB 20.94" on throat adjuster cam, maybe 40% japanning, spots of green paint on rear of cap & on end of adjuster screw, will clean to at least good usable cond.) $70 B1233: Stanley #203 adjustable 5 1/2" block plane (90%+ japanning, good BB logo cutter, good hardwood knob, very good overall condition) $95 B1253: Stanley #65 low angle block plane IOB (Post 1964 model plane in good yellow box with yellow & black label, plane has 98%+ japanning, 98%+ nickel on cap, box very good with only one small tear on one side, plane in fine overall condition) $110 B1254: Stanley #95 edge trimming block plane (95% japanning, very good BB logo cutter, previous owners name scratched into top of left side in small letters, clean and in very good overall condition) $125 B1256: Stanley #131 adjustable double ended block plane (at least 90% japanning, good SW logo cutter, very good rosewood knob, no rust pitting or structural damage, very good overall condition) $225 B1257: Stanley #110 block plane Type 4 or 5 (japanning 95% or better but likely a touch up job, good lever cap has the six-point star, knob refinished, type "J" cutter has little light rust, very good overall condition) $65 B1277: Stanley #65 low angle block plane Type 3 (95%+ nickel plating on cap & other parts, 95%+ japanning, number 65 in left side, left side also has "P1" stamped near bottom at rear, fine overall condition) $80 MISC. PLANES (RABBIT, ROUTER, SCRAPER, SCRUB, DADO, ETC.) M774: Stanley #113 circle plane Type 5 (80% japanning, good type "T" logo iron has almost 1 3/4" usable length remaining, plating on knob 80% & pealing, patent date on left side gear arm, very good overall condition) $120 M775: Stanley #113 circle plane Type 7 (90%+ japanning, 95% plating intact, SW logo on cutter, will easily clean to fine overall condition) $135 M855: Stanley 10 1/2 carriage makers rabbet plane (late model, BB logo iron, Stanley logo on lever cap, 95%+ japanning, owner's name lightly etched into right side, needs light cleaning, fine overall condition) $175 M934: Sargent #196 1" rabbit plane (Similar to Stanley 192, 80% japanning, complete with depth stop, very good overall cond.) $70 M995: Stanley #13 prelateral compass plane (50% japanning, good type "J" logo iron, solid adjusting nut with two patent dates, few patches of minor pitting on sole, front arm marked "BAILEY'S PATENT MARCH 28 1871" one rivet missing from where front arm attaches to sole plate, nice early piece in very good overall condition) $220 M1004: Stanley #20 compass plane (90%+ nickel plating, "No 20 STANLEY" cast into frame, adjusting nut not marked, three patent dates on lateral lever, good type "Q" iron, very good overall condition) $185 M1054: Stanley #112 scraper plane (new IT replacement blade, 75%+ japanning, good knob, splinter gone from tote spur and initials "WFL" lightly scratched into right side of tote, with light cleaning will in very good overall condition) $185 M1059: Stanley #90 bull nose rabbet plane (Made in USA, 55% nickel plating, good SW logo cutter, needs light cleaning, good overall usable condition) $65 M1072: Stanley #72 chamfer plane Type 2? (85% japanning, good type "J" logo iron, nice early tote with extra long spur, good knob, cast cap screw, brass star screw holding on front section, few dings at leading edge of nose piece, with light cleaning will be very good cond.) $375 M1090: Stanley #80 scraper (early model, 90% japanning, 95% nickel plating on strap and screws, good unmarked blade, very good cond.) $35 M1111: Stanley #90 bull nose rabbet plane (Made in USA model, like new BB logo iron, 95%+ nickel plating, has initials "GKF" lightly scratched into right side, at least very good overall condition) $90 M1113: Stanley #71 router Type 4 (70%+ nickel plating, good maple knobs, later model 1/2" cutter included, some light surface rust, will clean to very good overall condition) $55 M1129: Stanley 39-3/8 dado plane (later model, 90% japanning, 95% nickel plating on trim, Cap screw marked "STANLEY MADE IN U.S.A." is in very good overall condition, with light cleaning will be even better) $135 M1130: Stanley #75 bullnose rabbet (last US model, 99%+ blue japanning, like new cutter, fine overall condition) $25 M1142: Stanley #39-3/4" dado plane Type 1 (decorative screw etc., 95% japanning, a trace of light surface rust here & there, fine overall) $190 M1144: Stanley #10 1/2 carriage makers rabbet plane (85% japanning, top of type "Q" iron pitted [NOS BB logo blade included], very good tote and knob, with light cleaning will be very good overall) $245 M1145: Stanley #80M malleable iron scraper (92%+ japanning, 90%+ nickel plating on strap and screw, SW logo on strap, good BB logo blade, very good overall condition) $45 M1151: Stanley #78 rabbet & filletster plane Type 1 (80%+ japanning, good "PAT'D NOV.18 1884" iron, complete with fence & depth stop, very good overall condition) $65 M1152: Sargent #79 rabbet & filletster plane (90%+ japanning, later model, no markings on body, good "SARGENT VBM" iron, complete with fence & depth stop, very good overall condition) $60 M1162: Stanley #93 shoulder plane, like new Made in England cutter, 90%+ plating intact, initials HGS lightly scratched into each side twice, a fine usable plane) $115 M1163: Stanley #90 bullnose rabbet plane, has a good "Made in ENG." cutter, plating at least 80%, little minor pitting on right side, very good overall condition) $60 M1186: Stanley #78 duplex plane (later U.S. model, approx. 80% of blue japanning remains, good BB logo cutter, thumb operated blade adjuster, complete with fence and depth stop, light surface to exposed areas, will clean to very good usable condition) $45 M1196: Stanley #40 1/2 scrub plane (80%+ japanning, 95% nickel on cap screw, very good SW logo cutter, has initials AP lightly stamped and scratched into right side, initial "W" lightly scratched into top of good beech tote, good knob, very good overall condition) $125 M1199: Union? tongue & groove plane (similar to Stanley #48, 85%+ nickel plating, red stained knob has been dinged on top but is still intact and in good cond., one cutter missing, very good overall condition) $45 M1200: Stanley 39 3/4 dado plane (95% japanning, 95% nickel plating on trim, "V" logo in cap screw, very good cutter, depth stop is a correct but repainted replacement, fine overall condition) $145 M1219: Stanley #72 chamfer plane (80% japanning, good type "J" logo iron, nice rosewood tote & knob, machined cap screw w/knurled edge, steel star screw holding nose piece, very good overall condition) $400 M1221: Stanley #12 cabinet scraper (90%+ japanning, good unmarked cutter, nice handle, light rust on sides & sole, will clean to very good cond.) $75 M1222: Stanley #62 low angle block plane (80%+ japanning [mostly missing from rear of bed behind number], very small chip from top of tote spur, two small vertical cracks at base of knob, good SW logo cutter, throat not chipped or cracked, very good overall condition) $375 M1224: Stanley #40 scrub plane (later model, good beech tote and knob, good BB logo cutter 85%+ japanning, will clean to very good overall cond.) $60 M1226: Stanley #40 1/2 scrub plane (90%+ japanning, good SW logo cutter, good old style beech knob, one inch splinter from left side of tote spur, needs light cleaning but will clean to at least very good overall condition) $115 M1227: Stanley #81 cabinet scraper (75% nickel [pealing in places], good unmarked cutter, wooden sole has been replaced, replacement is chipped, is thick enough that it can be cleaned up by a jointer and made quite usable, at least good condition now, will improve considerably with cleaning) $40 M1228: Stanley #79 side rabbit (later made in USA model, 90%+ nickel, good original cutters, complete with fence, very good overall condition) $70 M1229: Stanley #81 cabinet scraper (90%+ nickel, good SW cutter has light rust on top, very good original rosewood sole, just a dusting of surface rust on lever cap, should clean to at least very good overall condition) $65 M1240: Record 073 adjustable 1 1/4" shoulder plane (little used plane with nearly 1 1/4" usable length remaining in very good cutter), will easily clean to fine overall condition) $230 M1244: Stanley #147-5/8" match plane (earlier model with cast cap screw heads, at least 90% nickel plating, two good cutters, very good overall condition) $165 M1246: Stanley #93 cabinet makers rabbet plane (later US model with 95% plus plating, little used BB logo cutter, at least very good cond.) $145 M1261: Stanley #39-1/2" dado plane (SW logo on head of cap screw, japanning 95%+ but likely enhanced, good cutter, complete with depth stop and both spurs, very good overall condition) $110 M1262: Stanley #90J bull nose rabbet plane NIB ("MADE IN ENG" model, new in original box with original wrapping paper, as new condition) $45 M1270: Stanley #71 router Type 14 (complete with all three cutters, fence, & throat closing attachment, 98%+ nickel plating, 98%+ black paint remains on knobs, shows no signs of use, fine or better condition) $85 M1272: Stanley #40 scrub plane (later model with very good rosewood tote and knob, at least 75% japanning, little used "BB" logo cutter, two small patches of light rust on sole, very good overall condition) $55 M1273: Stanley #113 Type 6 circular plane (90%+ japanning, 95%+ nickel on front "knob," like little used "V" logo cutter, small patches of light rust on sole, iron & chipper, will easily clean to near fine cond.) $140 M1274: Stanley #79 side rabbet (later U.S. model, 95% nickel plating, one very good cutter, other cutter MIA, intact fence, at least very good overall condition) $60 M1275: Stanley #95 edge trimming block plane (95%+ japanning, good SW logo cutter, at least 80% of original sticker remains on top, very good overall condition) $130 M1276: Stanley #10 1/2 carriage makers rabbet plane (later model with good BB logo cutter [a NOS cutter included], at least 90% japanning, 95% nickel on cap, good knob, scuffed but intact tote, very good overall condition) $165 M1278: Stanley #39-1" dado plane Type 4 (largest of the series, 90%+ japanning complete with spurs [both need resharpening], good cutter, SW logo on cap screw, a difficult 39 to find, very good overall cond.) $210 M1280: Stanley #98/99 side rabbets (later models with depth stops, 95%+ nickel, the #98 has two small blemishes on the back side, very good knobs, one cutter has "V" logo & the other is unmarked, fine set) $210 M1281: Stanley #378 weather-strip rabbet plane (at least 75% japanning, complete with three depth stops & two brass preset collars, clean & in very good overall condition) $145 M1282: Stanley #71 Type 2 router plane (has very good original handles, at least 85% japanning, only one cutter [1/4"] included, very good overall condition) $75 M1285: Stanley #113 circular plane Type I (less than 30% japanning, several patches of light to moderate pitting on sole, top of sole in very good condition, complete with good original iron and rear handle, at least good overall condition) $250 PLOW OR COMBINATION PLANES (METALLIC ) P984: Stanley #45 combination plane Type 11 (95% nickel plating intact, includes: box [no label] of 15 cutters [two more including slitter in plane], front depth stop, beading stop, cam [missing screw], rosewood fence with fine adjustment feature, missing rear depth stop and three cutters, very good overall condition) $145 P985: Stanley #45 combination plane Type 15 (95% nickel plating, complete with the following: two short boxes [no labels] of 20 cutters plus one in plane and a slitter for a total of 22, long and short rods, beading stop plus three other depth stops, missing only the cam and the locking screw for the fine adjustment of fence, fine cond.) $200 P1055: Stanley #55 Type I combination plane IOB (90%+ nickel plating, complete plane with all four main sections, early dated cam, auxilery tower [including shoe], two depth stops, both sets of rods, beading stop, screwdriver, all 52 original cutters, cutter boxes are in very good condition with labels ranging from 92% to 98%; chestnut box has replacement lid; picture label is 90%+ intact; also a tattered four-page owners manual and a tattered instruction sheet for the early cam, very good plane to use or collect) $675 P1056: Stanley #55 Type I combination plane IOB (80%+ nickel plating, includes: all four main sections [one rosewood fence is cracked and needs to be glued], one depth stop, cam, beading stop, 49 of the 52 original cutters including slitter [some cutters have light surface rust, all will clean easily], cutter boxes are in very good condition with water stained labels ranging from 65% to 80%; MISSING, auxilery tower, one depth stop and set of short rods; chestnut box is missing lid; picture label is 60%+ intact; good plane to use and/or collect) $450 P1122: Stanley #45 combination plane Type 14 (95% nickel plating, a few minor dings to otherwise perfect knob and handle, complete with: two boxes with 23 total cutters, cam, beading stop, two front & rear depth stops, slitter, cutter box #1 is in excellent cond. w/95%+ label, cutter box 2 in excellent cond. w/92% label, a fine plane made for only one year) $210 P1123: Stanley #45 combination plane Type 15 (85%+ nickel [beginning to peal in places], rosewood wear strip on fence a replacement, casting on fence chipped where locking screw screws in, screw still functional, two boxes of 17 total cutter, cam, beading stop, front & rear depth stops very good rosewood knob and handle, labels on cutter boxes 50 & 70%, a nearly complete plane in very good overall condition) $125 P1220: Stanley #45 combination plane Type 11 (85% nickel plating, includes two boxes containing 19 of original 21 cutters [some with light rust], cam, beading stop, front and rear depth stops, Missing two cutters, short rods & locking screw for the adjustable fence, very good overall cond.) $160 P1269: Stanley #45 Type 1 (Plane has 75%+ japanning, very good rosewood handle, knob is a very good but later replacement, brass screws that secure fence and sliding section are slotless, screws that secure front depth stop have screwdriver slots, no rust or pitting, set of sixteen cutters including dated slitter & dated tongue cutter, at least very good overall condition, this is the plane to put in your early box) $350 P1283: Stanley #55 combination plane (later SW logo model, at least 95% nickel plating intact, all 55 cutters in original boxes with 90%+ labels intact, includes #8 [slitter] & #55 in plane, very good rosewood handles, missing the locking screw for the adjustable fence & the owners book, fine overall condition, if you've got the box...) $485 MISC. COLLECTIBLE TOOLS MC325: Stanley #84 razor edge spoke shave ("STANLEY" name clearly stamped in top, marked on front "PAT'D 2-19-01" good cutter, 60% nickel, typical scratches and dings, very good overall condition) $125 MC326: Stearns hollow face spoke shave (similar to #55 Stanley, 80%+ japanning, very good cutter, very good overall condition) $25 MC327: Stanley #67 Universal spoke shave with both bottoms and often missing fence (at least 95% plating, very good wood, good SW logo cutter, very good overall condition) $145 MC328: Millers Falls #1 "Cigar" spoke shave (very good wood, at least 95% plating, not marked, very good overall condition) $45 TERMS (Please Read Carefully, Subject to Change) Buyer will pay actual shipping charges on all orders. Overseas orders as well as those from Alaska and Hawaii will be charged shipping and insurance at the prevailing rate. Things at UPS are pretty much back to normal (if you consider having all your packages opened and inspected normal) so I've gone back to using them on most packages over five pounds. Packages under five pounds will be mailed by U.S. Priority Mail or Parcel Post. Other arrangements can be made at additional expense to buyer. On orders under $150, when buyer is known to me, I will ship tools on an approval basis. Orders over $150 will be shipped upon receipt of certified check or money order (personal checks will be accepted, but may be held until they clear my bank.) Payment must be made in U.S. dollars. Missouri residents must now add 6.5% sales tax as we're a legit tax paying business. A full refund of the purchase price will be made on any item returned within 7 days of receipt provided it is returned via insured mail (at buyer's expense) and provided it is in the same condition as when shipped. Items discounted or altered in any way are not refundable. I'm always looking for unusual and quality metallic and wooden planes as well as well as other traditional woodworking tools to add to my inventory as well as my personal collection. I will buy single items or entire collections or will trade items from my list for special interest items. Send a detailed list of what you have and what your terms are. Will answer all. Make checks or money orders payable to: Michael J. Urness 705 Walfield Ln. St. Louis, MO 63141-6036 PLEASE include item number(s) on check and your email address and/or phone number on all other correspondence. If you absolutely must speak to me directly, e-mail me with your phone number and a time (including time zone) that you can be reached and I will call you ASAP.