|
To all
with R6 booths:
There
have been reports from Steve Knecht (Marin, CA) and Robert Pickett (Sales Rep,
NC) that the existing screws on the feet of the R6 unit are too short to
accommodate the thickness of the metal booth mounting brackets. Diebold
engineering (Canton, OH) is investigating this issue and will determine an
effective solution. In the meantime, the R6 units can be placed into
the booths without securing them so as to allow operation for early
voting requirements. Please exercise caution that the R6 unit is
transported separately from the booth until it can be secured with the proper
fasteners.
Sincerely,
Ian S. Piper
Diebold Election Systems,
Inc.
|